001 qs5210 840 open 1

2GIG-CO3-345—Tamper Error

A tamper error occurs when the panel is reading that the sensor’s cover is not attached properly. To address the tamper error on your 2GIG-CO3-345 carbon monoxide detector, follow the instructions below.


Step-by-Step Instructions:

1. Twist sensor counter-clockwise to remove from base.
001 qs5210 840 open 1

2. Close the sensor by aligning with the backplate and twisting clockwise, ensuring the tamper switch is pressed and the sensor is securely closed.
003 qs5210 840 close 1002b qs5210 840 tamper

Comments are closed.