How to Program the Kwikset 888 to Your Panel

When you are ready to set up your Kwikset 888 smart door lock, you will need to program it into your panel. Z-Wave devices are compatible with a variety of systems. Click on your panel below for instructions specific to your system. If your system is not represented below, you can text a Support Representative any time for programming instructions at 317-399-5748.

Qolsys IQ Panel 2 and Z-Wave Pairing Instructions:

1. Press or swipe down clock display at top for Settings Tray, then press Settings.
   
2. Press Advanced Settings, then enter the default installer code 1111.
   
3. Press Installation, then Devices.
   
4. Press Z-Wave Devices, Add Device, then Pair.
   
5. IQ Panel 2 enters Z-Wave learn mode.
   
6. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
   
7. If successful, the IQ Panel 2 displays device settings, press Name, then select the name.
   
8. Press Add, then Home to exit.
   
   2GIG GC2 and Z-Wave Pairing Instructions:
   1. Press Services, then press the Z-Wave logo.
      
   2. Press the wrench icon for settings, then enter the default installer code 1561
   3. Press Add Devices, entering the system into Z-Wave learn mode.
      
   4. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
      
   5. Learning may take up to 2 minutes, press Back or Home to exit.
      
      Interlogix Simon XTi and Z-Wave Pairing Instructions:
      1. Press the gear icon for the settings menu, then press the down arrow several times to reach Programming.
         
      2. Press Enter next to Programming, enter your master code, then press Ok.
         
      3. Press Interactive Services, then press Z-Wave.
         
      4. Press Add Device to start the learning process.
         
      5. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
         
      6. The Simon XTi beeps and displays Device XX Added. Press Close several times to exit.
         
         Interlogix Simon XT and Z-Wave Pairing Instructions:
         1. Hold the Star button (*) for 10 seconds to open the Z-Wave menu.
            
         2. Hold the 1 key for 10 seconds.
            
         3. The Simon XT enters Z-Wave learn mode.
            
         4. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
            
         5. When successful, the Simon XT beeps and displays the number of devices in memory.
            
         6. Hold # for 10 seconds to exit.