When it is time to replace the battery in your translator, you will see an alert on your system panel, as well as a notification in the In-alam™ Mobile App.

The RE524X translator requires a Ni-Mh 800mAh 6V RE030 battery pack, which can be purchased at your local hardware, mass retailer, or battery store.

You may also order these online here or at your preferred online retailer.

Step-by-Step Instructions:

1. Open the cover by lifting the tab on the right side of the translator to access the battery compartment inside the cover.
   
2. Unplug the battery connector from the circuit board, then press the tab on the bottom of the battery compartment to lift and remove from the inside cover.
   
3. Remove and replace the Ni-Mh 800mAh 6V RE030 battery pack, then return the battery compartment to the inside cover, reconnect the battery connector, and close the translator.
   
4. Remove and replace the Ni-Mh 800mAh 6V RE030 battery pack, then return the battery compartment to the inside cover, reconnect the battery connector, and close the translator.