Honeywell 5800PIR-RES—Battery Replacement


When it is time to replace the battery in your Honeywell 5800PIR-RES motion detector, you will see an alert on your system panel period.

The Honeywell 5800PIR-RES motion detector requires a CR123A 3-volt lithium battery, which can be purchased from Indiana Alarm, local hardware store, mass retailer, or battery store.

 

Step-by-Step Instructions:

1. Press the bottom tab to remove the front cover.
001 5800pir res open
2. Remove and replace the CR123A 3-volt lithium battery.
002 5800pir res batteries

3. Return the cover to the sensor, starting with the side opposite the bottom tab, pressing closed until the tab snaps into place.
003 5800pir res restore cover
4. Check if the low battery status has cleared