How to Program the Kwikset 888 to Your Panel 

When you are ready to set up your Kwikset 888 smart door lock, you will need to program it into your panel. Z-Wave devices are compatible with a variety of systems. Click on your panel below for instructions specific to your system. If your system is not represented below, you can call a Support Representative any time for programming instructions at 317-399-5748.
qolsysiqpanel2 web 600x600 12gig gc2e 345 web 600x600 1simonxti panelsimonxt panel 1

Qolsys IQ Panel 2 and Z-Wave Pairing Instructions:

  1. Press or swipe down clock display at top for Settings Tray, then press Settings.
    door lock 01door lock 02
  2. Press Advanced Settings, then enter the default installer code 1111.
    enter program 03 settings menu 6enter program 04 enter code 6
  3. Press Installation, then Devices.
    power down 01 3door lock 06
  4. Press Z-Wave DevicesAdd Device, then Pair.
    003.5 z wave selectiondoor lock 07door lock 08
  5. IQ Panel 2 enters Z-Wave learn mode.
    door lock 09
  6. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
    kwikset 888 a lock interior button to program
  7. If successful, the IQ Panel 2 displays device settings, press Name, then select the name.
    z wave thermostat add 03 learnedz wave thermostat add 05 name
  8. Press Add, then Home to exit.
    z wave thermostat add
    2GIG GC2 and Z-Wave Pairing Instructions:
    1. Press Services, then press the Z-Wave logo.
      1 home disarmed2 z wave services
    2. Press the wrench icon for settings, then enter the default installer code 156101 z wave main02 enter code
    3. Press Add Devices, entering the system into Z-Wave learn mode.
      03 toolbox add04 add device 1
    4. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
      kwikset 888 a lock interior button to program
    5. Learning may take up to 2 minutes, press Back or Home to exit.
      05 add device 206 add device 3a
      Interlogix Simon XTi and Z-Wave Pairing Instructions:
      1. Press the gear icon for the settings menu, then press the down arrow several times to reach Programming.
        enter programming 02 settings
      2. Press Enter next to Programming, enter your master code, then press Ok.
        enter programming 03 programming enter 1enter programming 04 enter code
      3. Press Interactive Services, then press Z-Wave.
        interactive services 01 main selectz wave add 01 interactive services menu
      4. Press Add Device to start the learning process.
        z wave add 02 z wave menuz wave add 03 add
      5. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
        kwikset 888 a lock interior button to program
      6. The Simon XTi beeps and displays Device XX Added. Press Close several times to exit.
        z wave add 04 addedmain screen
        Interlogix Simon XT and Z-Wave Pairing Instructions:
        1. Hold the Star button (*) for 10 seconds to open the Z-Wave menu.
          z wave menu 1
        2. Hold the 1 key for 10 seconds.
          simon xt z wave add 02
        3. The Simon XT enters Z-Wave learn mode.
          simon xt z wave add 03simon xt z wave add 04
        4. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.
          kwikset 888 a lock interior button to program
        5. When successful, the Simon XT beeps and displays the number of devices in memory.
          simon xt z wave add 05simon xt z wave add 07
        6. Hold # for 10 seconds to exit.
          pound button