PG9WLSHW8 Hardwired Translator

When it is time to replace the battery in your DSC  PG9WLSHW8, you will see an alert on your system panel.

Follow the instructions below to replace your battery and clear the alert from your system. The PG9WLSHW8 requires a 12V DC 7AH battery, which can be purchased form Indiana Alarm, local hardware store, mass retailer, or battery store.


Step-by-Step Instructions:

  1. Open enclosure.
  2. Remove existing battery
  3. Place the battery on the two plasic supports on the bottom of the enclosure.
  4. Clip the battery in place.
  5. Please ensure the battery red is connected to the red wire and battery black is connected to the black wire.

NOTE: Trouble could take 15 minutes to clear.